Various 3D designs I have made
I quite often design various 3D models for my own needs. I try to make these designs available for other people too as often as I can (or have time to finish them for that purpose). I have collected these designs here.
![](https://www.undeadparrot.com/wp-content/uploads/2023/01/undeadparrot-simpit-square-1024x1024.jpg)
My own cockpit
This is the 3D design I created for my latest cockpit build project. It isn’t 100% exact copy of my corrent setup since I’ve made some modifications along the way. But you can download the model and use it as the base for your own build.
![](https://www.undeadparrot.com/wp-content/uploads/2023/01/undeadparrot-star-citizen-power-control-panel-1024x1024.jpg)
Star Citizen power control panel
A power control panel I built for Star Citizen, mostly for fun. Requires some electical wiring and soldering.
![](https://www.undeadparrot.com/wp-content/uploads/2023/10/Simpit-3.0-Module-panels-v24.png)
Empty panels
Empty .stl files for my panels. Larger one is 190 x 120 mm and smaller one is 93 x 120 mm. Idea is that you can fit two smaller ones next to each other, with a small gap, in same size as the larger one.
![](https://www.undeadparrot.com/wp-content/uploads/2023/01/undeadparrot-virpil-flushmount-trims.jpg)
Virpil Control Panel flush mount trims
Flush mount trims for Virpil Control Panels #1 and #2 (I don’t own the #3 myself so I can’t make a trim for it).
![](https://www.undeadparrot.com/wp-content/uploads/2024/05/virpil-keycap-photo.jpg)
Virpil Control Panel key caps
Key caps I made to be placed on top of Virpil Control Panel LED keys.
![](https://www.undeadparrot.com/wp-content/uploads/2023/01/undeadparrot-ejection-seat-handle.jpg)
Ejection seat handle
An ejection seat handle I built for my previous cockpit.
» Download from Thingiverse» Watch the making-of video
![](https://www.undeadparrot.com/wp-content/uploads/2023/09/IMG_1616-1024x1024.jpeg)
Display stand mount (for mouse and keyboard)
I have mounted my mouse and keyboard on old display stands / arms. The original mount for them was too flimsy so I created this model to be attached to the side of the cockpit.
![](https://www.undeadparrot.com/wp-content/uploads/2024/05/drake-box-image.jpg)
Drake Startup Button Box
Drake Startup Button Box I created for my Arduino learning project. It has two versions of the top cover: one with the original hole, and one without any holes to add your own button.